The courses shown below represent all the courses that could be offered. Each course shows its current availability. Courses with no scheduled courses can be added to your wish list of courses. Your wish listed courses are viewable from your My Account page and tracked easily for availability. Wish list entries help to determine need for a course. If you need or want a course not available in your area, please add it to your wish list.
| Acoustic Ceiling |
Skill Advancement |
Exterior/Interior Systems |
16 |
$22.00 |
|
|
Login to view the schedule for this class |
 |
| Acoustical Ceilings |
$22.00 |
Required |
Description: This class is designed to instruct students in proper methods of layout and installation of acoustic grid ceiling systems.
|
|
| Advanced Blueprint & Drafting |
Apprenticeship |
Blueprint/Layout |
40 |
$13.00 |
|
|
Prerequisite: Basic Blueprint Reading
OR
Blueprint / Surveying
Login to view the schedule for this class |
|
| Print Reading |
$13.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Optional |
Description: This class covers interpretation of blueprints used in heavy commercial construction and basic drafting techniques needed to produce a simple orthographic drawing of a structure or individual components of a building. Advanced instruction in the use of Specification Books, Addendum Books, Take-Offs and Schedules will be presented
|
|
| Advanced Blueprint EIS |
Apprenticeship |
Blueprint/Layout |
40 |
$13.00 |
|
|
Prerequisite: Basic Blueprint Reading
OR
Blueprint / Surveying
Login to view the schedule for this class |
|
| Print Reading |
$13.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Optional |
Description: This class covers interpretation of blueprints used in metal stud commercial construction. Basic drafting techniques needed to produce a simple orthographic drawing of a structure or individual components of a building. Advanced instruction in the use of Specification Books, Addendum Books, Takeoffs and Schedules will be presented.
|
|
| Advanced Blueprint Reading MW -Or |
Apprenticeship |
Millwright |
40 |
$24.00 |
|
|
Login to view the schedule for this class |
|
| Reading Mechanical Prints |
$24.00 |
Required |
Description: This is an advanced course in blueprint reading designed specifically for millwrights. It covers assembly, detail and fabrication drawings. Students will make a drawing and construct a machine base concrete form In the shop.
|
|
| Advanced Concrete - Or |
Apprenticeship |
Carpentry - Rough |
40 |
$39.00 |
|
|
Login to view the schedule for this class |
|
| Concrete 2 |
$39.00 |
Required |
Description: This course includes instruction and practice in various concrete stair projects, building layout, bridge forms, and Insulated Concrete Form (ICF) construction. Curriculum includes concrete additives, reinforcing bar, and concrete form design.
|
|
| Advanced Framing |
Apprenticeship |
Carpentry - Rough |
40 |
$17.00 |
|
|
Login to view the schedule for this class |
|
| Stair Layout |
$17.00 |
Required |
Description: This course includes instruction and practice in advanced framing techniques, insulation, seismic, shear, building codes, and advanced stair building.
|
|
| Advanced Interior Finish |
Apprenticeship |
Carpentry - Finish |
40 |
$26.00 |
|
|
Login to view the schedule for this class |
|
| Finish Carpentry |
$26.00 |
Required |
Description: This course includes instruction and lab work concerning advanced interior door and window trim, crown molding, chair rail, base, wainscot, cabinet fabrication, cabinet installation, finish stair systems, scribing techniques, and solid surface countertops. Curriculum will cover table saw and router jigs. Curriculum will cover acceptable protocol for working in "occupied buildings".
|
|
| Advanced Welding |
Apprenticeship |
Millwright |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Metal Trades Book |
$20.00 |
Optional |
| Welding - Aws D1.1 |
$3.00 |
Optional |
Description: This course covers the essential skills of welding, including types of positions, flux core arc welding, gas tungsten arc welding, carbon air arc safety and blueprint reading, and the welding certification test: including codes and specifications, welding processes, joint design, weld symbols, print reading and welding practice.
|
|
| Aerial BoomLift/Work Platform Operator |
Skill Advancement |
Equipment |
8 |
$7.00 |
|
|
Prerequisite:
AND
Automobile drivers license
Login to view the schedule for this class |
|
| Aerial Lifts |
$7.00 |
Required |
Description: This is a training course designed for both new and experienced Aerial Boomlift ("snorkel lift") and Aerial Work Platform ("scissor lift") operators. The students will learn through group discussions, workbooks, videos, and hands-on training, making this course beneficial to all. This course meets all OSHA operator training requirements. Upon successful completion of this course, a safety training card will be issued.
|
|
| Anatomy of Bridge Construction |
Apprenticeship |
Carpentry - Rough |
40 |
$25.00 |
|
|
Login to view the schedule for this class |
|
| Bridge Formwork |
$25.00 |
Required |
Description: This course will give students proper layout and construction sequence of bridge construction. Course covers bridge construction tools, hardware, and terminology of bridge construction.
|
|
| Automatic Taping Tools |
Apprenticeship |
Taping |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Automatic Taping Tools Operation & maintenance of automatic taping tools. Procedure for automatic tool taping, butt joints, flats, angles, closet angles, & applying short tapes.
|
|
| Basic Blueprint Reading - Or |
Apprenticeship |
Blueprint/Layout |
40 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Print Reading |
$13.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Optional |
Description: This class covers the reading of blueprint, basic drafting principles, and related math skills.
|
|
| Basic Cleanroom Technology |
Skill Advancement |
Cleanroom |
10 |
$40.00 |
|
|
Login to view the schedule for this class |
|
| Cleanroom Construction (SM) |
$40.00 |
Required |
Description: This course includes an introduction to the practice of cleanroom protocol, cleanroom wall systems, cleanroom floor systems, and cleanroom ceiling systems.
|
|
| Bearing & Lubricants - Or |
Apprenticeship |
Millwright |
40 |
$87.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Industrial Trades Handbook |
$21.00 |
Required |
| Ipt Rotating Equipment Handbook |
$21.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Required |
Description: This course covers the basic principles of lubricating types of oils and greases, applications of friction and roller bearings used in the industry. This information will then help trouble shoot Lubrication and Bearing failure(s).
|
|
| Best Practices in Health Care |
Skill Advancement |
Carpentry |
24 |
$17.00 |
|
|
Login to view the schedule for this class |
|
| Best Practices In Health-Care |
$11.00 |
Required |
| Blood Borne Pathogens 6h Edition |
$6.00 |
Required |
| Awareness:Hazardous Material, |
$26.00 |
Optional |
Description: This course offers instruction and practice of identifying hazardous material and professionalism while working in the Health Care environment.
|
|
| Blueprint I |
Skill Advancement |
Blueprint/Layout |
16 |
$51.00 |
|
|
Login to view the schedule for this class |
|
| Print Reading For Construction - Residential & Commercial |
$51.00 |
Required |
Description: The student at the end of this course should be able to recognize and use lines, symbols, abbreviations on residential and commercial blueprints. Emphasis will be on Architectural and Structural drawings.
|
|
| Blueprint II |
Skill Advancement |
Blueprint/Layout |
16 |
$51.00 |
|
|
Prerequisite: Blueprint I
AND
or Instructors approval
Login to view the schedule for this class |
|
| Print Reading For Construction - Residential & Commercial |
$51.00 |
Required |
Description: In this course the student will learn how to interpret plot plans, civil drawings, shop drawings, electrical and mechanical drawings. Secondary documents including RFIs, addendums, and changes will be introduced.
|
|
| Boom Truck Safety Awareness |
Skill Advancement |
Equipment |
16 |
$0.00 |
|
|
Prerequisite:
AND
Automobile drivers license
Login to view the schedule for this class |
|
| Boom Truck Operator Workbook |
$19.00 |
Optional |
| Ipt Crane Rigging Handbook |
$20.00 |
Optional |
Description: This course instructs the student in the basics of boom truck operation. The classroom and hands-on program stresses the safety of the boom truck to meet the demands of OSHA and the construction industry. A four-year safety training card is issued upon successfully completing class.
|
|
| Boom Truck Safety Awareness Refresher |
Skill Advancement |
Equipment |
8 |
$0.00 |
|
|
Prerequisite: Boom Truck Operator
AND
Current Boom Truck Safety Training Card
Login to view the schedule for this class |
|
Description: This refresher course will update the students boom truck qualification card. The student will review pre-shift equipment and job-site inspections, load chart interpretation and safe operating procedures for boom trucks. Any changes in OSHA safety regulations will be covered. Upon successful completion of this course, a four year safety training card will be issued.
|
|
| Bridges & Trestles |
Apprenticeship |
Piledriver |
40 |
$25.00 |
|
|
Login to view the schedule for this class |
|
| Bridge Formwork |
$25.00 |
Required |
Description: This course will involve safety, bridge and trestle building equipment, techniques, and tools used. This course will also include basic seamanship.
|
|
| Ceilings |
Apprenticeship |
Exterior/Interior Systems |
40 |
$22.00 |
|
|
Login to view the schedule for this class |
|
| Acoustical Ceilings |
$22.00 |
Required |
Description: This course will cover the installation of various types of ceilings. Student lab projects will supplement in-class work.
|
|
| Cleanroom - Or |
Apprenticeship |
Cleanroom |
40 |
$40.00 |
|
|
Login to view the schedule for this class |
|
| Cleanroom Construction (SM) |
$40.00 |
Required |
Description: Introduction to the practice of cleanroom Protocol
|
|
| Cleanroom 40 Hour |
Apprenticeship |
Cleanroom |
40 |
$10.00 |
|
|
Login to view the schedule for this class |
|
| Cleanroom Training |
$10.00 |
Required |
Description: In this course students will learn cleanroom protocol and how cleanrooms are classified. Students will become familiar with required tools and learn how to install cleanroom floor, ceiling and wall components. Students will also learn how to identify and fill out a pre-task procedure form, to work in cleanroom protocol levels 1-6 and all safety aspects of cleanroom construction.
|
|
| Cleanroom Ceilings |
Skill Advancement |
Cleanroom |
10 |
$40.00 |
|
|
Login to view the schedule for this class |
|
| Cleanroom Construction (SM) |
$40.00 |
Required |
Description: This course includes an introduction to Cleanroom ceiling systems, print reading, types of ceiling grid, Cleanroom ceiling components, tiles & pans, handling & storage.
|
|
| Cleanroom Protocols |
Skill Advancement |
Cleanroom |
10 |
$40.00 |
|
|
Login to view the schedule for this class |
|
| Cleanroom Construction (SM) |
$40.00 |
Required |
Description: This course includes an in depth look into the practice of Cleanroom protocols, strict construction rules designed to minimize dirt brought into the Cleanroom, HEPA vacuum systems, debris cleanup, Cleanroom garments, gloves, booties, personal hygiene, tools, Cleanroom paper and pens.
|
|
| Cleanroom Raised Access Floors |
Skill Advancement |
Cleanroom |
10 |
$40.00 |
|
|
Login to view the schedule for this class |
|
| Cleanroom Construction (SM) |
$40.00 |
Required |
Description: This course includes an introduction to raised access floors, understructure, support systems and accessories, seismic and load requirements, Cleanroom raised access floor preparation and rough floor and confined space.
|
|
| Cleanroom Wall Systems |
Skill Advancement |
Cleanroom |
10 |
$40.00 |
|
|
Login to view the schedule for this class |
|
| Cleanroom Construction (SM) |
$40.00 |
Required |
Description: This course includes an introduction to the proper installation of Cleanroom wall systems, Cleanroom doors, Cleanroom windows and tool bulkheads.
|
|
| Commercial Soffit Framing |
Skill Advancement |
Exterior/Interior Systems |
12 |
$6.00 |
|
|
Prerequisite: Metal Stud Comm. Framing
Login to view the schedule for this class |
|
| Metal Frame & Drywall |
$6.00 |
Required |
Description: This course covers layout and erection of metal stud soffit. Included are curtain and indirect lighting pockets.
|
|
| Concrete |
Apprenticeship |
Carpentry - Rough |
40 |
$42.00 |
|
|
Login to view the schedule for this class |
|
| Concrete 1 |
$42.00 |
Required |
Description: This course includes instruction in footing forms, single-water wall forms, tilt-up construction, gang forms, column forms, beam forms and deck forms. Projects in each area are completed in the lab.
|
|
| Concrete Form |
Skill Advancement |
Carpentry - Rough |
16 |
$26.00 |
|
|
Login to view the schedule for this class |
|
| Concrete Formwork |
$26.00 |
Required |
Description: This is the study of various types of concrete forming systems. Their applications are presented in the classroom and hands-on exercises in the lab.
|
|
| Construction ESL-Spanish |
Other |
Specialty |
16 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Community Colleges Education Department offers classes for people interested in learning basic English used in the construction industry. One does not have to speak English to register for or take these classes which are provided at no cost to the student.
|
|
| Construction Fall Protection |
Skill Advancement |
Safety |
8 |
$12.00 |
|
|
Login to view the schedule for this class |
|
| Construction Fall Protection R1.0 |
$12.00 |
Required |
Description: Participants will learn the requirements of OSHA Fall Protection for both Commercial and Residential Construction. This will include related terminology, fall hazard recognition, selection and implementation of fall protection systems, inspection and use of fall arrest equipment and the importance of overhead protection.
|
|
| Construction Mathematics |
Apprenticeship |
Construction Math |
40 |
$55.00 |
|
|
Login to view the schedule for this class |
|
| Construction Pro Calculator Bundle |
$45.00 |
Required |
| Construction Mathematics |
$10.00 |
Required |
Description: This course includes instruction and practice in mathematics used in construction. Non-calculator math, scientific calculator math and Construction Master IV math are covered.
|
|
| Construction Survey & Layout |
Apprenticeship |
Blueprint/Layout |
40 |
$94.00 |
|
|
Prerequisite: Blueprint / Surveying, Advanced Blueprint & Drafting
Login to view the schedule for this class |
|
| Total Station (Sm) |
$34.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Required |
| Leveling & Layout Instruments |
$15.00 |
Required |
Description: This course covers the use of Total Station Equipment used in the carpentry trade. Along with layout math, principles and methods for laying out angles, elevations, points and grades will be applied in hands-on exercises.
|
|
| Conveyor Installation |
Apprenticeship |
Millwright |
40 |
$6.00 |
|
|
Login to view the schedule for this class |
|
| MW - Unit 3 - Monorails - Part 1 |
$2.00 |
Required |
| MW - Unit 3 - Conveyors - Part 2 |
$4.00 |
Required |
Description: This class covers the basic installation procedures for various types of conveyors. Students will work on projects in the lab involving conveyor installation based on blueprints
|
|
| Coupling Installation - Shaft Alignment |
Skill Advancement |
Millwright |
8 |
$21.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Industrial Trades Handbook |
$21.00 |
Required |
Description: This class covers the fundamentals, safety and correct terminology of various types of shaft couplings. The emphases on proper selection and installation of couplings.
|
|
| CPR |
Skill Advancement |
Safety |
8 |
$10.00 |
|
|
Login to view the schedule for this class |
|
| Basic Plus Student Pack (G2010) |
$10.00 |
Required |
Description: This class teaches the latest methods of this life saving skill. Airway, breathing, circulation assessment are taught using Medic First Aid Mark 6 teaching aids. A two-year card will be issued upon completion.
|
|
| Diver & Diver Tender |
Apprenticeship |
Piledriver |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course will cover marine construction diving techniques; concerning safety, diver tending, terminology, operations and equipment used.
|
|
| Dock Repair, Deck, Pile Splicing |
Apprenticeship |
Piledriver |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course will cover pilings, caps, decks, and fender systems, used on docks and wharfs. This course will also cover structural and design factors, different systems used seamanship, and safety methods.
|
|
| Door Certification |
Skill Advancement |
Carpentry - Finish |
24 |
$0.00 |
|
|
Prerequisite: Doors & Hardware III
Login to view the schedule for this class |
|
| Doors And Hardware Sm |
$23.00 |
Optional |
Description: This course is a review of Doors I, II, and III. With the addition of the selection of the proper door hardware components; and the proper procedure for the procurement (ordering) of selected parts for door hardware. Various manufacturers and brands will be discussed, but the focus will be on those manufacturers and products directly connected to the Ingersoll-Rand Company. Upon successful completion of this course, a certification card from Ingersoll-Rand will be issued. This certification is effective for three (3) years. Successful completion of Doors I, II, and III is required for acceptance in this course.
|
|
| Doors & Hardware |
Apprenticeship |
Carpentry - Finish |
40 |
$14.00 |
|
|
Login to view the schedule for this class |
|
| Doors And Hardware Sm |
$14.00 |
Required |
Description: This course includes installation of wood and metal jambs, installing wood and metal doors, and the installation of door closures, exit hardware, and latch lock sets. Projects in each area will be completed in the lab.
|
|
| Doors & Hardware I |
Skill Advancement |
Carpentry - Finish |
12 |
$23.00 |
|
|
Login to view the schedule for this class |
|
| Doors And Hardware Sm |
$23.00 |
Required |
Description: This course covers job planning, identification of wood frames, metal frames, hanging devices and door installation. This course will offer both hands on and classroom settings.
|
|
| Doors & Hardware II |
Skill Advancement |
Carpentry - Finish |
12 |
$0.00 |
|
|
Prerequisite: Doors & Hardware I
AND
or instructor approval
Login to view the schedule for this class |
|
| Doors And Hardware Sm |
$23.00 |
Optional |
Description:
This course covers locking devices, closers, exit devices and taps. This course will offer both hands on and classroom settings.
|
|
| Doors & Hardware III |
Skill Advancement |
Carpentry - Finish |
12 |
$0.00 |
|
|
Prerequisite: Doors & Hardware II
Login to view the schedule for this class |
|
| Doors And Hardware Sm |
$23.00 |
Optional |
Description: This course covers electric control devices, coordinator installation, door seals, specialty doors and door codes. This course will offer both hands on and classroom settings.
|
|
| Drywall Coatings |
Apprenticeship |
Taping |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Selecting fillers, moisture testing, & procedure for rough sanding bead, joints, angles, & fasteners.
|
|
| Drywall Finishes (Texturing) |
Apprenticeship |
Taping |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Identify different types of texture & surface preparation. Hand and machine applications, & techniques.
|
|
| Drywall Installation |
Apprenticeship |
Exterior/Interior Systems |
40 |
$21.00 |
|
|
Login to view the schedule for this class |
|
| Drywall Application |
$21.00 |
Required |
Description: This course covers the fabrication and installation of drywall panels, including required drywall trim. Lab projects will supplement textbook readings and exercises.
|
|
| EFCO Concrete Forms |
Skill Advancement |
Carpentry - Rough |
8 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This class will cover the basics of the EFCO column and decking form systems.
|
|
| EIS Finals |
Apprenticeship |
Exterior/Interior Systems |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This is the final Exterior/Interior apprenticeship week. The curriculum builds on the culmination of lessons and skills learned in previous classes. New curriculum concerning the total construction project from planning through supervisory is presented. Forklift truck qualification cards and First Aid/CPR cards will be issued to students upon successful completion of those two courses.
|
|
| EIS Printreading, Interiors |
Skill Advancement |
Exterior/Interior Systems |
8 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This class is designed for UBC members to improve their interior printreading skills, deepen their understanding of ratings, finishes, and construction documents.
|
|
| Equipment & Machinery - Or |
Apprenticeship |
Millwright |
40 |
$25.00 |
|
|
Login to view the schedule for this class |
|
| Boiler Operators Workbook |
$25.00 |
Required |
Description: This course will familiarize the students with the various types of equipment found in the industry, and give the student a basic knowledge of how to work around the different type of equipment, such as air compressors, turbines, and robotics. Cert. for overhead crane
|
|
| Ergonomics |
Skill Advancement |
Specialty |
5 |
$14.00 |
|
|
Login to view the schedule for this class |
|
| Ergonomics ( SM ) |
$14.00 |
Required |
Description: This Ergonomics course will help workers recognize working conditions that put them at risk or could cause injury and to think about strategies aimed at reducing the risks and exposures to Carpal Tunnel Syndrome, Repetitive Motion Injuries and Musculoskeletal Disorders.
|
|
| Exterior Finish - Or |
Apprenticeship |
Carpentry - Finish |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course includes installation of exterior finish materials including exterior trim, siding, soffits, fascias, roofing, decks, exterior doors and windows. Lab projects will be completed in each area of study.
|
|
| Exterior Metal Framing |
Apprenticeship |
Exterior/Interior Systems |
40 |
$20.00 |
|
|
Login to view the schedule for this class |
|
| Commercial and Residential Steel Framing |
$20.00 |
Required |
Description: This course involves instruction in: Structural print reading; examination and performance of engineered drawings and details; structural framing shop project that implements all specified engineering requirements; classroom lecture to enhance the students understanding of technical requirements necessary to meet structural drawing criteria."
|
|
| Frame Scaffolding |
Apprenticeship |
Scaffold Erector |
40 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This class covers the basics of frame scaffolding. It also includes an introduction to rigging, scaffold loading, and blueprint drawing.
|
|
| GE Gas Turbine Familiarization |
Skill Advancement |
Millwright |
24 |
$8.00 |
|
|
Login to view the schedule for this class |
|
| Hytorc Bolting Qualification Manual |
$4.00 |
Required |
| Ge Gas Turbine Familiarization |
$4.00 |
Required |
Description: This workshop is for UBC members that work on GE Gas Turbines. Day-1 covers identification of GE Gas Turbine components, disassembly procedures, inspections and re-assembly procedures. Day-2 covers new installations of GE Gas Turbines. Day-3 is a "Bolting Technology" workshop. Members who successfully complete the "Bolting Technology" section will become "Hytorc Qualified - Bolting Technicians".
|
|
| Green Building Awareness |
Skill Advancement |
Specialty |
8 |
$6.00 |
|
|
Login to view the schedule for this class |
|
| Awareness Green Building (SM) |
$6.00 |
Required |
Description: Green Building Awareness is the starting point for every United Brotherhood of Carpenters (UBC) member who needs to learn about this critical development that affects every member's life and work. This awareness-level workshop prepares participants to respond intelligently to contractors, colleagues, supervisors, and clients about the advantages and basic practices of green building. Participants will also be prepared to learn specific green building procedures and applications that are necessary in the 21st century world of construction.
|
|
| Hydraulics & Pneumatics |
Apprenticeship |
Millwright |
40 |
$20.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Industrial Hydraulics Handbook |
$20.00 |
Required |
Description: This class covers the theories of pneumatics and hydraulics, basic system component identification and handling, and trouble shooting systems. It also covers relevant safety issues, lock-out/tag-out procedures, and Material Safety Data Sheets.
|
|
| Industrial Forklift Operator |
Skill Advancement |
Equipment |
8 |
$0.00 |
|
|
Prerequisite:
AND
Automobile drivers license
Login to view the schedule for this class |
|
Description: This is a training course designed for both new and experienced industrial forklift operators. The students learn with group discussions, workbooks, videos and hands-on training, making this course beneficial to all. This course meets all OSHA training requirements.
|
|
| Interior Renovation |
Apprenticeship |
Exterior/Interior Systems |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course covers the procedures for doing Interior Renovations. Tool requirements, cleanup, barriers and proper etiquette while working on remodeling or new construction in occupied buildings will be covered in depth.
|
|
| Interior Trim & Cabinets - Or |
Apprenticeship |
Carpentry - Finish |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course includes instruction in basic cabinet construction, cabinet installation, counter top installation, plastic laminate, shelving, paneling, and interior standing and running trim. Projects in each area will be completed during the week.
|
|
| Introduction -Or |
Apprenticeship |
General |
40 |
$60.00 |
|
|
Login to view the schedule for this class |
|
| 29 CFR Part 1926 |
$7.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Required |
| Financial Guide To Success |
$5.00 |
Required |
| Introduction To OSHA |
$3.00 |
Required |
Description: This course offers qualifications on Scaffold User, First Aid/CPR, OSHA 10, and Ergonomics. Labor History, Administrators of the Trust plan, Hand and Power Tool Safety, and non-calculator Math studies are also covered.
|
|
| Introduction To Green Building |
Skill Advancement |
Specialty |
8 |
$25.00 |
|
|
Prerequisite: Green Building Awareness
Login to view the schedule for this class |
|
| Sustainable Building Technical Manual |
$25.00 |
Required |
Description: This course provides an introduction to green building including defining green building and identifying the motivations, fundamental concepts and strategies, roles and responsibilities, and key programs, tools and resources available to prepare carpentry professionals to contribute to the successful construction of green building projects.
|
|
| Introduction to Scaffold |
Apprenticeship |
Scaffold Erector |
40 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This class is for Scaffold Erector Apprentices Only. It covers basic OSHA and WISHA standards applicable to the trade. It also enables students to attain the following certifications: C-STOP or OSHA 10; Hazardous Materials, Confined Space; Fork Lift, and First Aid/CPR.
|
|
| Introduction to Taping Program |
Apprenticeship |
Taping |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Overview of all classes: Drywall taping sequences, taping methods- butt joints, flats, angles short tapes
|
|
| Job Management |
Apprenticeship |
Leadership |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course in Job Management covers the in-between nature of the supervisor's role in construction, what is expected of a person as a supervisor vs. working as a crew member. Also covered is role of communication in construction and the skills required to identify various communication problems and behaviors.
|
|
| Labor Studies I |
Apprenticeship |
Specialty |
3 |
$0.00 |
|
|
Login to view the schedule for this class |
|
| Our Labor Movement Past & Present |
$15.00 |
Optional |
Description: This course is a brief overview of some of the important events that shaped the world we live in and the workforce struggle for the standards that we enjoy today.
|
|
| Labor Studies II |
Apprenticeship |
Specialty |
3 |
$0.00 |
|
|
Login to view the schedule for this class |
|
| Our Labor Movement Past & Present |
$15.00 |
Optional |
Description:
|
|
| Labor Studies III |
Apprenticeship |
Specialty |
3 |
$0.00 |
|
|
Login to view the schedule for this class |
|
| Our Labor Movement Past & Present |
$15.00 |
Optional |
Description:
|
|
| Labor Studies IV |
Apprenticeship |
Specialty |
3 |
$0.00 |
|
|
Login to view the schedule for this class |
|
| Our Labor Movement Past & Present |
$15.00 |
Optional |
Description:
|
|
| Lathing |
Apprenticeship |
Exterior/Interior Systems |
40 |
$39.00 |
|
|
Login to view the schedule for this class |
|
| Lathing Sm |
$39.00 |
Required |
Description: This course provides training in Lathing. 1. proper tying of hanger wire to main carrier. 2. 3/4" iron tying to 11/2" iron (practice tying) 3. Furring a wall with 3/4" iron and lathing. 4. lay out and framing of dome ceiling. 5. proper tying of metal lath (practice tying) 6. installing grounds, trims and expansion/control joints.
|
|
| Lathing II (Stucco) |
Apprenticeship |
Exterior/Interior Systems |
40 |
$39.00 |
|
|
Prerequisite: Lathing
Login to view the schedule for this class |
|
| Lathing Sm |
$39.00 |
Required |
Description: This class covers the installation of flashing, lath, and lath trims. Weather proofing of exterior building, with proper application of required water resistant barriers.
|
|
| Layout Specialist I |
Skill Advancement |
Blueprint/Layout |
16 |
$16.00 |
|
|
Prerequisite: Blueprint II
AND
Basic math, blueprint reading, basic layout procedures
Login to view the schedule for this class |
|
| Leveling & Layout Instruments |
$16.00 |
Required |
Description: This course covers the use of the builders level, and laser level in the carpentry trade. Along with elevation layout principles, and methods for using the leveling equipment to determine the elevations above and below Height of Instrument, (HI) and establish elevations from an existing bench mark. Grades will be applied in hands-on exercises.
|
|
| Layout Specialist II |
Skill Advancement |
Blueprint/Layout |
16 |
$16.00 |
|
|
Prerequisite: Layout Specialist I
AND
or Instructors approval
Login to view the schedule for this class |
|
| Leveling & Layout Instruments |
$16.00 |
Required |
Description: This course covers the use of the layout instruments in the carpentry trade. Along with elevation layout principles, and methods for using the layout equipment to determine angles, elevation and alignment using Degrees, minutes, seconds (DMS) and right angle calculations. Hands on exercises will be applied using transit and theodolite.
|
|
| Machine Installation |
Apprenticeship |
Millwright |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This class covers the care and use of alignment instruments. It also includes blueprint reading, measurement and other features of machine installation.
|
|
| Machine Shop Work |
Apprenticeship |
Millwright |
40 |
$27.00 |
|
|
Login to view the schedule for this class |
|
| Machine Shop Operation & Setups |
$20.00 |
Required |
| Machine Shop Operation & Setups Student Guide |
$7.00 |
Required |
Description: This course is designed to give the student a basic knowledge and training in conventional machine tool operation and to understand the latest machine tool processes and developments. The student will do projects with the engine lathe, milling machine, key mill operations, and tool sharpening.
|
|
| Master Calculator |
Skill Advancement |
Construction Math |
8 |
$45.00 |
|
|
Login to view the schedule for this class |
|
| Construction Pro Calculator Bundle |
$45.00 |
Required |
Description: This course covers the use of the Construction Master calculators. Learn how to calculate the lengths of common, hip, valley, and jack rafters. Conversion of fractions to decimals, areas, volumes, and determining angles will also be covered.
|
|
| Material Safety Data Sheets (MSDS) |
Skill Advancement |
General |
8 |
$14.00 |
|
|
Login to view the schedule for this class |
|
| Material Safety Data Sheet ( SM ) |
$14.00 |
Required |
Description: Material Safety Data Sheets (MSDS) are an important tool to provide safety on a jobsite. This course is designed to give students the necessary information on how to locate, read and understand MSDS sheets.
|
|
| Materials & Prep Work |
Apprenticeship |
Taping |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Prep Work Proper handling, storage, procedures for wallboard, filler and beading materials. Protecting nearby areas.
|
|
| Metal Framing & Drywall |
Apprenticeship |
Carpentry - Finish |
40 |
$17.00 |
|
|
Login to view the schedule for this class |
|
| Introduction To Metal Framing |
$14.00 |
Required |
| PNCI Drywall Application |
$3.00 |
Required |
Description: This course provides and overview of metal framing, drywall, suspended ceilings and accessible floors.
|
|
| Metal Guard Fabrication |
Apprenticeship |
Millwright |
40 |
$20.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Metal Trades Book |
$20.00 |
Required |
Description: This course covers welding topics, ocy-acetylene brazing, and the fabrication of guards using rollers and press brakes.
|
|
| Metal Stud Comm. Framing |
Skill Advancement |
Exterior/Interior Systems |
16 |
$6.00 |
|
|
Login to view the schedule for this class |
|
| Metal Frame & Drywall |
$6.00 |
Required |
Description: In this course the student will learn layout and framing methods. This includes the reading of prints relating to wall framing and methods of converting finish measurements to rough layout. Various stud layouts will be utilized in the lab.
|
|
| Metal Stud Framing & Layout |
Apprenticeship |
Exterior/Interior Systems |
40 |
$9.00 |
|
|
Login to view the schedule for this class |
|
| Introduction To Metal Framing |
$9.00 |
Required |
Description: This course involves instruction in layout and erection of metal stud walls, metal jambs and borrowed light frames, fasteners and adhesives, column and pilaster framing, beams and soffets, and arches. Projects incorporating thesis areas are completed in the lab.
|
|
| Millwright Safety 16 |
Skill Advancement |
Safety |
16 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Millwright 16-Hour Health & Safety Part I |
$8.00 |
Required |
| Millwright 16-Hour Health & Safety Part Ii |
$5.00 |
Required |
| 29 CFR Part 1926 |
$8.00 |
Optional |
| Niosh Pocket Guide To Chemical Hazards |
$4.00 |
Optional |
|
$2.00 |
Optional |
| Construction Industrial Digest |
$2.00 |
Optional |
| Gen. Ind Digest |
$0.00 |
Optional |
| Glove Card |
|
|
Description: This safety course is a requirement with the Westinghouse Turbine twenty-four hour course. This course will also satisfy the safety requirement needed for the GE Turbines Familiarization course. This also qualifies as the OSHA - 10 hour course.
|
|
| Optical Instruments |
Apprenticeship |
Millwright |
40 |
$6.00 |
|
|
Login to view the schedule for this class |
|
| Precision Optical Instruments: Advanced Jig Transit |
$3.00 |
Required |
| Precision Optical Instruments: Basic Jig Transit |
$3.00 |
Required |
Description: This course will cover the fundamental of care, set-up, safety and proper procedures for using optical instruments used in the millwright trade.
|
|
| Optical Precision Alignment |
Skill Advancement |
Millwright |
8 |
$6.00 |
|
|
Login to view the schedule for this class |
|
| Precision Optical Instruments: Advanced Jig Transit |
$3.00 |
Required |
| Precision Optical Instruments: Basic Jig Transit |
$3.00 |
Required |
| Builders Level & Transit |
$4.00 |
Optional |
Description: This class covers precision alignment and leveling using a builders level, theodolite, and K&E tilting level.
|
|
| OSHA 10 |
Skill Advancement |
Safety |
10 |
$21.00 |
|
|
Login to view the schedule for this class |
|
| 29 CFR Part 1926 |
$7.00 |
Required |
| Smart Mark Confined Spaces |
$1.00 |
Required |
| Smart Mark Electrical Safety |
$1.00 |
Required |
| Smart Mark Ergonomics |
$1.00 |
Required |
| Smart Mark Fall Protection Trainee Booklet |
$1.00 |
Required |
| Smart Mark Fire Safety |
$1.00 |
Required |
| Smart Mark Hazard Communication |
$1.00 |
Required |
| Smart Mark Materials Handling |
$1.00 |
Required |
| Smart Mark Ppe |
$1.00 |
Required |
| Smart Mark Scaffold Safety |
$1.00 |
Required |
| Smart Mark Stairways & Ladder |
$1.00 |
Required |
| Smart Mark Tool Safety |
$1.00 |
Required |
| Introduction To OSHA |
$3.00 |
Required |
Description: This course interprets the Occupational Safety and Health Act 29, CFR 1926. It helps identify the common causes of accidents and fatalities in the hazardous areas of construction. Students practice reading OSHA standards, learn the definition of Competent Person, and also the application of standards. A one time OSHA 10 course completion card will be issued.
|
|
| OSHA-30 |
Skill Advancement |
Safety |
30 |
$22.00 |
|
|
Login to view the schedule for this class |
|
| 29 CFR Part 1926 |
$7.00 |
Required |
| Smart Mark Confined Spaces |
$1.00 |
Required |
| Smart Mark Electrical Safety |
$1.00 |
Required |
| Smart Mark Ergonomics |
$1.00 |
Required |
| Smart Mark Fall Protection Trainee Booklet |
$1.00 |
Required |
| Smart Mark Fire Safety |
$1.00 |
Required |
| Smart Mark Hazard Communication |
$1.00 |
Required |
| Smart Mark Materials Handling |
$1.00 |
Required |
| Smart Mark Ppe |
$1.00 |
Required |
| Smart Mark Scaffold Safety |
$1.00 |
Required |
| Smart Mark Stairways & Ladder |
$1.00 |
Required |
| Smart Mark Tool Safety |
$1.00 |
Required |
| Smart Mark Introduction To Osha |
$1.00 |
Required |
| Introduction To OSHA |
$3.00 |
Required |
Description: This course interprets the Occupational Safety and Health Act 29, CFR 1926. It helps identify the common causes of accidents and fatalities in the hazardous areas of construction. Students practice reading OSHA standards, learn the definition of Competent Person, and also the application of standards. A one time OSHA 30 course completion card will be issued.
|
|
| Overhead Crane Safety Awareness |
Skill Advancement |
Equipment |
8 |
$27.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Crane Rigging Handbook |
$20.00 |
Required |
| Over Head Crane |
$7.00 |
Required |
Description: In this course the student will learn the fundamentals of overhead crane safety. Regulations governing overhead cranes, procedures for pre-shift inspection, site specific requirements, emergency shut-off and safety operating tips will be presented. Basic techniques for load calculations will also be covered. A three-year Overhead Crane Safety Awareness card will be issued upon successful completion of this course..
|
|
| Overton Boomtruck |
Skill Advancement |
Specialty |
16 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This Boomtruck class is instructed by Overton Safety. Upon completion of the class members will be issued a Boomtruck Opertaters card good for the state of Oregon
|
|
| Patch Work |
Apprenticeship |
Taping |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Procedure in , damaged,cracked, holes in sheetrock. Replacement of total/partial sheets.
|
|
| PERI Engineered Concrete Forms |
Skill Advancement |
Carpentry |
8 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course includes instruction in the use of "PERI" TRIO engineered concrete forms. The course will demonstrate multiple uses of various TRIO systems. Instruction will include both classroom and hands on activities.
|
|
| Pile Caps |
Apprenticeship |
Piledriver |
40 |
$44.00 |
|
|
Login to view the schedule for this class |
|
| Introduction to Pile Driving (SM) |
$44.00 |
Required |
Description: This course covers methods, procedures, safety practices, tool and equipment used on all types of pile caps. This course will also cover management relations.
|
|
| Piledriving, Fresh Heading |
Apprenticeship |
Piledriver |
40 |
$24.00 |
|
|
Login to view the schedule for this class |
|
| Exclusion and Retention Structures (SM) |
$24.00 |
Required |
Description: This course covers Piledrivers and leads; types of rigs and accessories used, driving hammers, extractors and augers; types used. Pilings; types used, Piledriving, fresh heading and splicing, and safety.
|
|
| Power Transmission |
Apprenticeship |
Millwright |
40 |
$21.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Industrial Trades Handbook |
$21.00 |
Required |
Description: This course covers the fundamentals of power transmission layout, installation, operation, and maintenance. It also covers safety issues and related mathematics.
|
|
| Pumps & Valves |
Apprenticeship |
Millwright |
40 |
$39.00 |
|
|
Login to view the schedule for this class |
|
| Flowserve Pump & Repair Technician, Level 1 |
$39.00 |
Required |
Description: This course will cover the operation and handling of various types of pumps and valves. It will stress inspection and trouble-shooting. Students will rebuild pumps and valves in the lab and will learn to install components.
|
|
| Residential Steel Framing |
Apprenticeship |
Exterior/Interior Systems |
40 |
$20.00 |
|
|
Login to view the schedule for this class |
|
| Commercial and Residential Steel Framing |
$20.00 |
Required |
Description: This course includes instruction in residential metal framing, including beams, sills, and
Joists; wall and roof framing; and overhangs; decking and sheathing; and residential framing layout. Projects in each area are completed in the lab.
|
|
| Rigging / Boom Truck Safety Awareness - Or |
Apprenticeship |
Safety |
40 |
$14.00 |
|
|
Login to view the schedule for this class |
|
| Riggers Pocket Guide |
$2.00 |
Required |
| Rigging Sm |
$12.00 |
Required |
| Ipt Crane Rigging Handbook |
$20.00 |
Optional |
Description: This course presents proper rigging techniques and boom truck operation, stressing safety and equipment care. Rigging hardware hand signals, radio voice signals, lifting procedures and load calculations are studied in the class room as well as applied in hands-on exercises. Upon successful completion of this course, a PNCI rigging safety awareness and boom truck safety awareness cards will be issued.
|
|
| Rigging Qualification |
Skill Advancement |
Safety |
40 |
$19.00 |
|
|
Login to view the schedule for this class |
|
| Riggers Pocket Guide |
$2.00 |
Required |
| Rigging Sm |
$17.00 |
Required |
Description: This course will cover basic rigging hardware and rigging practices. Topics to be covered will include wire rope construction, hardware inspection for serviceability, knot tying and splicing, sling configurations and calculations for sling tension. Session will include hands-on rigging practice with a hydraulic crane using hand signals and voice commands with a two-way radio.
A UBC qualification card will be issued upon successful completion of this course.
|
|
| Rigging Qualification Refresher |
Skill Advancement |
Safety |
16 |
$0.00 |
|
|
Prerequisite: Rigging Qualification
AND
Current rigging qualification card
Login to view the schedule for this class |
|
| Riggers Pocket Guide |
$1.00 |
Optional |
| Rigging Sm |
$12.00 |
Optional |
Description: This course is necessary for updating current rigging cardholders. This rigging refresher course concentrates on safety, hardware inspection, working load limit calculations, and any changes in rigging regulations in CFR 1926. A UBC qualification card will be renewed upon successful completion of this class. The last 4 hours of class is for testing.
|
|
| Roof Framing - Or |
Apprenticeship |
Carpentry - Rough |
40 |
$10.00 |
|
|
Login to view the schedule for this class |
|
| Armadillo Gear Protective Hard Case - fits Calculator |
$10.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Optional |
Description: This course includes instruction in designing, cutting, erecting, and sheathing residential framed roof systems. Gable and hip and intersecting roof projects will be completed in the lab.
|
|
| Roof Framing I |
Skill Advancement |
Carpentry - Rough |
24 |
$0.00 |
|
|
Login to view the schedule for this class |
|
| The Rafter Book |
$21.00 |
optiomal |
Description: This course presents basic theory, calculations and proper layout practices for gable and hip roofs. All of the roof framing terminology such as slope, pitch, rise, run, rafter lengths, common, hip, and jack rafters will be taught. Some of the construction problems encountered in basic gable and hip roof framing will be addressed.
|
|
| Roof Framing II |
Skill Advancement |
Carpentry - Rough |
24 |
$0.00 |
|
|
Prerequisite:
AND
Roof Framing I or Instructors approval
Login to view the schedule for this class |
|
| The Rafter Book |
$21.00 |
optional |
Description: This course reviews calculations and layout of common, hip, valley, and jack rafters. Intersecting roofs are introduced with emphasis on layout and installation of valley and jack rafters.
|
|
| Rough Terrain Extended Boom Forklift |
Skill Advancement |
Equipment |
8 |
$10.00 |
|
|
Prerequisite:
AND
Automobile drivers license
Login to view the schedule for this class |
|
| Powered Industrial Truck Operator |
$10.00 |
Required |
Description: This is a comprehensive training course designed for both new and experienced rough terrain forklift operators. Group discussions, workbooks, videos and hands on training make this course beneficial to all. This course meets OSHA training requirements. A three-year qualification card is issued upon completion.
|
|
| Scaffold Erector - Or |
Apprenticeship |
General |
40 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This course provides training to qualify students to erect scaffolding: Load calculations, erection and dismantling of welded frame, tube and clamp, and systems scaffold will be covered in classroom study and hands-on exercises. Regulations from OSHA -- CFR -- 1926 covering scaffold erection and fall protection will also be addressed.
|
|
| Scaffold Erector Qualification |
Skill Advancement |
Scaffold Erector |
40 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This course provides training to individuals that want to qualify to erect scaffolding. Tubular welded frame, Tube and Clamp, Systems and other types of scaffolding will be studied in the classroom with hands-on exercises in the lab. Members successfully completing this course will receive a four year UBC Scaffold Erector Qualification card.
|
|
| Scaffold Erector Refresher |
Skill Advancement |
Scaffold Erector |
8 |
$13.00 |
|
|
Prerequisite: Scaffold Erector
AND
Current scaffold erectors card
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This course is for re-qualification of the UBC Scaffold Erectors card. Any changes regarding scaffold erection in CFR - 1926, Subpart L will be covered. A review of math calculations, proper and safe techniques for assembly/disassembly of various scaffold systems will be reviewed. Information on new products will also be presented.
|
|
| Scaffold User |
Skill Advancement |
Safety |
8 |
$1.00 |
|
|
Login to view the schedule for this class |
|
| Smart Mark Scaffold Safety |
$1.00 |
Required |
Description: This course is designed for workers and employers who want training to help them recognize and minimize scaffold hazards. It is also to satisfy the training requirements of the new OSHA scaffold standards. This course is a one day training session for all employees who must perform their jobs working from scaffolding. Completion of this class allows workers to work on properly erected scaffolding, but not make any structural changes or work level deck height changes to the scaffolding. Scaffold user qualification card will be issued by the UBC upon successful completion of this course. Remember, all workers involved with using scaffolding must be trained.
|
|
| Shaft Alignment |
Apprenticeship |
Millwright |
40 |
$21.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Industrial Trades Handbook |
$21.00 |
Required |
Description: This class covers shaft alignment, including rough, rim and face, reverse, and laser alignment. It covers lock-out, tag-out, safety procedures. It also covers mathematical calculations related to alignment.
|
|
| Shaft Alignment (Laser) III |
Skill Advancement |
Millwright |
8 |
$21.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Industrial Trades Handbook |
$21.00 |
Required |
| Laser Shaft Alignment Systems: Standard Opt Align |
$5.00 |
Optional |
Description: In this course the student will learn shaft and coupling alignment using the Rotoalign laser system. This course consists of both classroom and hands-on lab.
|
|
| Shaft Alignment I (Rim & Face) |
Skill Advancement |
Millwright |
8 |
$25.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Industrial Trades Handbook |
$21.00 |
Required |
| Machinery Alignment Procedures |
$4.00 |
Required |
Description: This course covers basic theory of shaft and coupling alignment. Rough alignment is taught using feeler gauges and straight edges. The use of dial indicators and how to interpret their reading will also be studied.
|
|
| Shaft Alignment II (Reverse) |
Skill Advancement |
Millwright |
8 |
$25.00 |
|
|
Login to view the schedule for this class |
|
| Ipt Industrial Trades Handbook |
$21.00 |
Required |
| Machinery Alignment Procedures |
$4.00 |
Required |
Description: In this advanced course, the student will learn reverse dial and multiple train coupling alignment. This is both in the classroom and hands-on in the lab.
|
|
| Shotcrete-CIT |
Other |
Specialty |
8 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course will cover Shotcrete history, development and usage. Different processes ~ dry and wet mix, materials and equipment, crew duties and qualifications, preconstruction test panels, placement and quality control,core samples will be examined and scored.
|
|
| Siemens Human Performance |
Skill Advancement |
Millwright |
8 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: The goal of Human Performance training is to build the skills to use HP practices and tools to safely navigate through an error-likely situation, without causing harm to yourself, others, and the equipment that you are working on. Using Human Performance practices and techniques maintenance work can be managed more effectively and errors dont have to lead to losses in safety, quality, and productivity.
|
|
| Soffit |
Apprenticeship |
Exterior/Interior Systems |
40 |
$9.00 |
|
|
Login to view the schedule for this class |
|
| Advanced Metal Framing |
$9.00 |
Required |
Description: This course covers layout and erection of metal stud soffit. Included are curtain and indirect lighting pockets
|
|
| Stairs I |
Skill Advancement |
Carpentry - Rough |
24 |
$17.00 |
|
|
Login to view the schedule for this class |
|
| Stair Layout |
$17.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Optional |
Description: In this course the student will learn basic theory of stair construction. The calculations needed, code requirements, safety, proper layout, cutting and assembly for open and closed stairwells will be taught.
|
|
| Stairs II |
Skill Advancement |
Carpentry - Rough |
24 |
$0.00 |
|
|
Prerequisite:
AND
Stairs I or Instructor approval
Login to view the schedule for this class |
|
Description: In this course the student will learn the different types of stairs used in construction. These will include limited run, change of direction, and three step winder stairs. The calculations, the layout and the cutting out of these stairs will be practiced. Designing stairs to maintain headroom will also be shown.
|
|
| Stepping Up to Foreman |
Skill Advancement |
Leadership |
8 |
$9.00 |
|
|
Login to view the schedule for this class |
|
| Stepping Up To UBC Foreman |
$9.00 |
Required |
Description: This class is designed for UBC members to understand ideas, skills and techniques on becoming an effective foreman.
|
|
| Steward Training |
Skill Advancement |
Specialty |
4 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course is designed to train UBC members to become effective job stewards. Trainees will be taught how to promote the health, safety and legal rights and responsibilities of the membership under a collective bargaining agreement. Areas covered include defining the role of Steward, defining the role of Business Representative, Collective Bargaining Agreements, Contract Administration, Labor Law, Trade Jurisdiction, Health Care, Retirement and Workplace Safety. National and local history of the Carpenters Union will also be addressed.
|
|
| STP-1-Leadership & Motivation |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-1 Pm Leadership & Motivation |
$135.00 |
Required |
Description: This course consists of ten topics, Dollars and sense of people in construction, Role of the construction supervisor, Helping people perform better, Motivation, Leading others, You get what you expect, Positive feedback, Training and motivating crew members, Teams and team building, Leadership skills in action.
|
|
| STP-10-General & Specialty Contractor Dynamics |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-10 General And Specialty Contractor Dynamics |
$135.00 |
Required |
Description: Students will study the role of the construction supervisor in construction systems. Students will learn the importance of working together as a general or specialty contractor for a successful completion of a project. The topics covered will be: Construction Systems, Contractual Relationships, Remove concern and doubt, Communication, Plans and specifications, mobilization, time management, productivity & project closeout.
|
|
| STP-2 Oral and Written Communications |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-2 Pm Oral & Written Communication |
$135.00 |
Required |
Description: This course consists of nine topics, What is communication?, Getting your point across, Written communication, Helping other people communicate with you, Active listening, Understanding and obtaining commitment, Getting your point across with a difficult person, Communicating with all organizational levels, and Communicating with groups.
|
|
| STP-3 Problem Solving & Decision-Making |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-3 Pm Problem Solving & Decision Making |
$135.00 |
Required |
Description: This course consists of nine topics, Problem prevention and anticipation, Identifying problems, How to solve scheduling and technical problems, Strategies for solving human performance problems, Creative problem solving, Barriers to developing creative solutions, Establishing a problem solving atmosphere, Developing follow-up systems, and Changing your mind.
|
|
| STP-4-Contract Documents and Construction Law |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-4 Pm Contract Documents & Construction Law |
$135.00 |
Required |
Description: This class consists of ten topics, Introduction to contract documents and construction law, Creating a positive environment, Contractual relationships, Contract forms and documents, Managing general conditions, Good documentation practices, Changes, Differing site conditions, Time impacts, and Negotiation of resolutions.
|
|
| STP-5-Planning and Scheduling |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-5 Pm Planning And Scheduling |
$135.00 |
Required |
Description: This course consists of ten topics, Introduction to planning and scheduling, Preparing the project plan, Communicating the plan, The critical path, Computer use in scheduling - part 1, Computer use in scheduling - part 2, Using the schedule on the jobsite, Updating the construction schedule, The schedule as documentation, and Using planning and scheduling.
|
|
| STP-6-Cost Awareness & Production Control |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-6 Pm Cost Awareness & Production Control |
$135.00 |
Required |
Description: This course consists of nine topics, The cost control cycle, The estimate, The estimate breakdown, Work and cost analysis, Short interval production scheduling (SIPS), Cost control, Reporting and cost comparisons, Production control, Project debriefing and evaluation.
|
|
| STP-7-Accident Prevention & Loss Control |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-7 Pm Accident Prevention & Loss Control |
$135.00 |
Required |
Description: This course consists of ten topics, The high price of accidents, Safety communication and motivation, Documentation and inventories, Using reference material and advisory sources, Project security and traffic control, Using the project schedule to prevent losses, Selecting methods and equipment to prevent losses, Assigning responsibility and equipment maintenance, Common construction hazards, Government regulations and inspections.
|
|
| STP-8-Managing The Project |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-8 Pm Project Management |
$135.00 |
Required |
Description: This course consists of ten topics, preconstruction planning, planning, organizing, and staffing, Developing the project plan, Planning for production and support, Cost and risk control, Policies and procedures, Purchasing and receiving, Subcontractor management, Project layout, Project start-up and close-out.
|
|
| STP-9-Productivity Improvement |
Skill Advancement |
Leadership |
25 |
$135.00 |
|
|
Login to view the schedule for this class |
|
| Stp-9 Pm Productivity Improvement |
$135.00 |
Required |
Description: This course consists of nine topics, Organizing a project for productivity improvement, Planning, scheduling and productivity improvement, Challenging the existing work process, Work improvement analysis - basic models, Managing a project as a company not a job, Communication, record keeping and productivity, Work improvement analysis - quantitative methods, Understanding a workers ability to do quality work, Implementing and monitoring a productivity improvement program.
|
|
| Suspend/Hanging/Wood Scaffolds |
Apprenticeship |
Scaffold Erector |
40 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This class will cover rope and wire suspended scaffolds, hanging scaffolds and wood scaffolds.
|
|
| System Scaffold |
Skill Advancement |
Safety |
16 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: System Scaffold has many similarities as tube and clamp scaffolds, but have there own unique fasting system. This 16 hour class will instruct participants on how to safely and properly erect System Scaffold.
|
|
| Systems Scaffolds |
Apprenticeship |
Scaffold Erector |
40 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This course is an introduction to system scaffolds. Students will learn to use blueprints to assemble and dismantle system scaffolds and will continue their study of scaffold loading calculations.
|
|
| Taping Hand Tools |
Apprenticeship |
Taping |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Taping Tools. Identify tools of the trade. Inspecting, cleaning, and safety of hand tools.
|
|
| Tenant Improvement Renovation |
Skill Advancement |
Exterior/Interior Systems |
8 |
$37.00 |
|
|
Login to view the schedule for this class |
|
| Trade Show Installation & Dismantling |
$37.00 |
Required |
Description: This class is designed for UBC members to understand ideas, skills, techniques and professionalism while working in an occupied Tenant Improvement Renovation.
|
|
| Total Station I |
Skill Advancement |
Blueprint/Layout |
24 |
$88.00 |
|
|
Prerequisite: Blueprint I, Blueprint II, Layout Specialist I, Layout Specialist II
Login to view the schedule for this class |
|
| Total Station (Sm) |
$31.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Required |
| All-Weather Level |
$2.00 |
Required |
| Total Station Job Sheet |
$10.00 |
Required |
Description: This course covers the use of basic Total Station surveying instruments for carpenter trades. This course will cover layout math, principles and methods for laying out angles, elevations and points using the Total Station both in the classroom and lab.
|
|
| Total Station II |
Skill Advancement |
Blueprint/Layout |
24 |
$79.00 |
|
|
Prerequisite: Blueprint I, Blueprint II, Layout Specialist I, Layout Specialist II, Total Station I
Login to view the schedule for this class |
|
| Total Station (Sm) |
$34.00 |
Required |
| Construction Pro Calculator Bundle |
$45.00 |
Required |
Description: This course covers the use of the Data Collector with the Total Station. Students will learn to calculate, enter, and edit points and elevation into the Data Collector.
|
|
| Trade Show 40 Hour - Or |
Skill Advancement |
Tradeshow |
40 |
$37.00 |
|
|
Login to view the schedule for this class |
|
| Trade Show Installation & Dismantling |
$37.00 |
Required |
Description: This class provides an overview of the Trade Show Industry. This class will cover Orientation, Floor Layout, Carpet, Systems, Install & Dismantle, Material Handling, High Wall, Show Site Graphics and TS Forepersons.
|
|
| Trade Show Customer Service I |
Skill Advancement |
Tradeshow |
8 |
$37.00 |
|
|
Login to view the schedule for this class |
|
| Trade Show Installation & Dismantling |
$37.00 |
Required |
Description: This is the first of a two part basic skill readiness building. This course is designed to instruct and prepare Tradeshow workers on essential entry level work skills needed to successful.
|
|
| Trade Show Customer Service II |
Skill Advancement |
Tradeshow |
4 |
$57.00 |
|
|
Prerequisite: Tradeshow Customer Service I
Login to view the schedule for this class |
|
| Trade Show Installation & Dismantling |
$37.00 |
Required |
| Stepping Up To UBC Foreman |
$20.00 |
Required |
Description: This is the second of the two part basic readiness skill building. Building on concepts previously introduced in Customer Service I, this four hour course focuses on instruction specifically dealing with difficult people, conflict resolution and communication.
|
|
| Trade Show Foreman |
Skill Advancement |
Tradeshow |
28 |
$57.00 |
|
|
Prerequisite:
AND
Must be a Qualified Trade Show Journeyman
Login to view the schedule for this class |
|
| Trade Show Installation & Dismantling |
$37.00 |
Required |
| Stepping Up To UBC Foreman |
$20.00 |
Required |
Description: This course covers the duties and responsibilities of trade show foreman as required by the trade show industry.
|
|
| Trade Show Rigging |
Skill Advancement |
Safety |
40 |
$37.00 |
|
|
Prerequisite: Aerial BoomLift/Work Platform Operator
Login to view the schedule for this class |
|
| Trade Show Rigging |
$37.00 |
Required |
Description: This course will cover basic rigging hardware and rigging practices. Topics to be covered will include wire rope construction, hardware inspection for serviceability, knot tying and splicing, sling configurations and calculations for sling tension. Session will include hands-on rigging practice with a hydraulic crane using hand signals and voice commands with a two-way radio.
|
|
| Trade Show Systems |
Skill Advancement |
Tradeshow |
8 |
$37.00 |
|
|
Prerequisite: Trade Show Orientation
Login to view the schedule for this class |
|
| Trade Show Installation & Dismantling |
$37.00 |
Required |
Description: This course covers trade show exhibition systems, installation and removal procedures, safety requirements, necessary tools and special and common features of systems displays.
|
|
| Trim Beads & Metal |
Apprenticeship |
Taping |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: Procedure for rolling angles, wiping angles, & using paper and metal beads & trouble shooting.
|
|
| Tube & Clamp Scaffold |
Skill Advancement |
Scaffold Erector |
20 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This class will provide instruction in the assembly and dismantling of tube and clamp scaffolds. Proper techniques for work on enclosures will be covered.
|
|
| UBC Turbine Familiarization/ OSHA 16 |
Apprenticeship |
Millwright |
40 |
$0.00 |
|
|
Prerequisite: Millwright Safety 16, Rigging Qualification
Login to view the schedule for this class |
|
Description: This workshop is for UBC members that work on GE Gas Turbines. Day-1 covers identification of GE Gas Turbine components, disassembly procedures, inspections and re-assembly procedures. Day-2 covers new installations of GE Gas Turbines. Day-3 is a "Bolting Technology" workshop. Members who successfully complete the "Bolting Technology" section will become "Hytorc Qualified - Bolting Technicians".
|
|
| Weatherization Installer I |
Pre-Apprenticeship |
Carpentry |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course is designed to provide the Weatherization Installer with basic carpenter skills that include math, hand/power tool identification and safety. Installers will learn professionalism in an occupied setting and the importance of recycling construction debris.
|
|
| Weatherization Installer II |
Pre-Apprenticeship |
Carpentry |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course is designed to provide the Weatherization Installer the skills to properly install windows, doors, weather stripping, caulking, building paper, wall, ceiling and floor insulation. Installer will also be trained in negative air flow, sealing and insulating of ducts.
|
|
| Weatherization Introduction to Safety |
Pre-Apprenticeship |
Carpentry |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course is designed to provide the Weatherization Installer with the skills to insure proper jobsite safety. The course will cover 1st Aid/CPR, OSHA-10, MSDS Sheets, Scaffold User, Fall Protection and Hazard Awareness for Mold, Lead, Asbestos and Feces.
|
|
| Welded Frame, Mobile Tower Scaffold |
Skill Advancement |
Scaffold Erector |
16 |
$13.00 |
|
|
Login to view the schedule for this class |
|
| Scaffolding Erection Sm |
$13.00 |
Required |
Description: This course is for certification for erecting Welded Frame Scaffolds and Mobile Tower Scaffolds only. Students will learn proper erection procedures and OSHA Scaffold Regulations.
|
|
| Welding & Cutting - Or |
Apprenticeship |
Welding |
40 |
$23.00 |
|
|
Login to view the schedule for this class |
|
| Welding - Aws D1.1 |
$3.00 |
Required |
| Welding And Cutting |
$20.00 |
Required |
| Welding Accessories |
$10.00 |
Optional |
Description: This course covers the fundamentals of welding and cutting, both electric arc and oxyacetylene, and types of welding processes. Students will learn how to strike an arc, identify and select electrodes, run beads and weld joints
|
|
| Welding Laboratory |
Skill Advancement |
Welding |
8 |
$0.00 |
|
|
Prerequisite: Welding Principle
OR
Welding & Cutting - Or
Login to view the schedule for this class |
|
Description: This course id designed to take the welding principles and apply them for field application. Welding Laboratory will be basic welding skills, learning different methods of striking an arc, flat position welding, and introducing horizontal position welding. For those who wish to become proficient in either stick or wire ( 1-G & 2-G or Light Gauge) or those who want to practice their welding skills
|
|
| Welding Principle |
Skill Advancement |
Welding |
8 |
$3.00 |
|
|
Login to view the schedule for this class |
|
| Welding - Aws D1.1 |
$3.00 |
Required |
Description: This introduction course covers both oxyacetylene welding and arc welding. Training includes class discussion on welding theory, safety practices, practical use of welding, various types of welding rod, weld and welding symbols, welding procedures, welding machines and their applications.
|
|
| Wood Framing - Or |
Apprenticeship |
Carpentry - Rough |
40 |
$0.00 |
|
|
Login to view the schedule for this class |
|
Description: This course includes instruction in residential wood framing, including beams, sills, joists, lay-out, plate detailing, wall framing and stair framing. Projects in each area are completed in the lab.
|
|
